Author Topic: Boy and Girl figures made in london - maker A.F. Co unknown material (Read 9890 times)

caterer · « **on:** February 28, 2009, 07:50:56 PM »

Can anyone help me identify these 2 figures
boy and girl, both marked with made in london, on the back of the boy is the letters a.f. co this is in a circle
what are these made of you ask, well good question, it is hard but not breakable, proberly from a mould, i thought maybe a resin but i dont know, they have been painted, there is some of the paint missing and the colouring is almost marble looking
they are dressed in what looks like war times era

These may be nothing of interest but something caught my eye with them, now I am interested in any info, especially what the marks stand for.
I have exhausted my searcing mainly becasue i do not know what they are made of.
help!!!

Anne · « **Reply #1 on:** March 01, 2009, 05:41:58 PM »

Could you do us some larger pics of the base please? Anything up to around 600x800 pixels in size should fit on the board if saved for the web (i.e.optimised). If you can't get them to a small enough filesize by keeping them bigger images, drop them to me in an email and I'll sort them and add them in for you.

(See envelope under my name to be able to email me.)

caterer · « **Reply #2 on:** March 01, 2009, 08:17:25 PM »

Hi
thanks for that i will come back tomorrow, just about to watch a film.
Take care
Hazel

antiquerose123 · « **Reply #3 on:** March 01, 2009, 08:21:26 PM »

Hi there, and Welcome.
yes, if you could supply a larger photo that would be great. As Anne said, if you have any problems, just give her a shout (or just e-mail) the larger pics to her.

Once a larger pixs is on here, then it will help us to try to figure it out...

Are they a Dutch Girl, and Boy?? Being plain, not sure a wild, wild, wild guess (aardewerkfabriek) or wrong??

Found these on Ebay where they are marked A.F. Co. CLICK HERE

Or am I in left field, as usual....

caterer · « **Reply #4 on:** March 02, 2009, 11:20:15 AM »

hey that is interesting, i tried searching using the info I had, but if it is typed just that little bit differently it is amazing what can be found, i was looking for a.f.co and was not getting anything, but i dont think i checked ebay worldwide, so that is a start. now about the dutch connection, not so sure, the dress the figures are wearing does look like war time cloths, but what cloths did the dutch childern wear?

?
I will attempt to do the photo again for a closer view on the stamp.
Thank you for your help
Hazel

caterer · « **Reply #5 on:** March 02, 2009, 11:59:25 AM »

I have tried another photo, could not get to the correct pixels requested, if this is not good I have asked anne to let me know how to attach a pic to her email,

also this mark is not on the base it is on the back towards the bottom.

Hazel

Anne · « **Reply #6 on:** March 02, 2009, 12:49:59 PM »

Hi Hazel, that's fine, thank you - we can see what is says now.

It's interesting that it says Made in London, rather than Made in England which would be more usual... now let's see what we can find out for you.

caterer · « **Reply #7 on:** March 02, 2009, 05:01:34 PM »

Thats great, I do not know what else i can do in the searching dept, i did try the change of wording that was suggested but i still cane up against a brick wall, :bh:but as you noted the made in london is interesting, I may be sitting on a fortune, ha ha no chance, but i live in hope

Hazel

Tigerchips · « **Reply #8 on:** March 02, 2009, 05:54:13 PM »

Perhaps it was made for a retailer?

Can we view the base please.

caterer · « **Reply #9 on:** March 02, 2009, 07:11:34 PM »

Hi attached a photo of the base, dont think it will be much help though,

hazel

Lustrousstone · « **Reply #10 on:** March 02, 2009, 07:46:33 PM »

They look to be painted with gloss paint!?

caterer · « **Reply #11 on:** March 02, 2009, 08:03:03 PM »

yes they are painted which is even odder as they almost look like they have been hand made.

Tigerchips · « **Reply #12 on:** March 02, 2009, 08:14:36 PM »

No firing hole? Could be plaster then...

Leonardi was based in London, maybe other companies too.

caterer · « **Reply #13 on:** March 02, 2009, 08:36:51 PM »

the material is medium weight, they look as if you dropped them they would not smash, they are solid, but i would not want to try, if you flick your nails on them they make dull ching if that is a word, like when you flick a cheap piece of glass, it is like they have been made from a mould.

hazel

Lustrousstone · « **Reply #14 on:** March 03, 2009, 07:44:53 AM »

Sounds like they are resin to me

caterer · « **Reply #15 on:** March 03, 2009, 10:32:36 AM »

I must agree I did think of resin as well, that could be another avenue to explore, i dont know i do know how to find the difficult ones, these have me intrigued.

Hazel

antiquerose123 · « **Reply #16 on:** March 07, 2009, 07:20:01 AM »

Quote from: caterer on March 02, 2009, 05:01:34 PM

..... i did try the change of wording that was suggested but i still cane up against a brick wall.....
Hazel

Brick Wall for you ----->

and me

Stupid question maybe -- they are not Chalk Ware are they ?? Are any edges chipping away, and can you scratch into it at the chip?

Sorry if a stupid question...but maybe chalk ware, painted over -- if such a thing ??

caterer · « **Reply #17 on:** March 07, 2009, 11:08:51 AM »

Hi
no not chalk, they are solid as if a type of resin, I have some bits to take to auction sometime, i think i will take these just to find out what they are, thats if they know, if i do find out i will have to let everyone know who as tried to help me.

thanks anyway

Hazel

antiquerose123 · « **Reply #18 on:** March 08, 2009, 11:43:10 PM »

Okey dokey...sounds like a Plan....will be interesting to find out

ChimpMad · « **Reply #19 on:** March 11, 2009, 12:53:43 PM »

An easy way to tell if it's resin; heat a needle or pin until it's glowing then try and push it into an inconspicuous part of the figure (preferably into one of the scratches on the base). If the needle slips in easily, it's resin.

Oh, almost forgot, hold the needle with pliers and only heat the tip. I didn't the first time I tried this.......